10,000+ LED Tri-Proof Lights | Saudi Arabia | 2025 | Parking Lot Lighting
A large-scale LED lighting supply project featuring more than 10,000 GS-TPE1500-60W LED tri-proof lights for a parking lot application in Saudi Arabia, supported by CB certification and large-volume manufacturing capability.
LOCATION
Saudi Arabia, Middle East
YEAR
2025
PRODUCTS
LED Tri-Proof Light – TPE Series
APPLICATION
Parking Lot Lighting
Project Name: Saudi Arabia Parking Lot Lighting Project
Location: Saudi Arabia, Middle East
Application: Parking Lot Lighting
Project Scale: 10,000+ LED Fixtures
Products: LED Tri-Proof Light GS-TPE1500-60W
Certification: TUV CB
Lighting Supplier: GS LIGHT
In 2025, GS LIGHT supplied more than 10,000 LED tri-proof lights for a parking lot lighting project in Saudi Arabia. The project required a standardized lighting solution that could be manufactured and supplied consistently at large volume.
The selected GS-TPE1500-60W LED tri-proof light features a 1.5m linear form factor, 60W power, 7,800lm luminous output and 130lm/W efficiency. The product is supported by CB certification for international project requirements.
* Image source: GS LIGHT LED Tri Proof Light Test
The project required a standardized lighting solution that could be supplied consistently across more than 10,000 fixtures, with sufficient output for large-area parking applications and clear documentation for international project procurement.
* Image source: GS LIGHT LED Tri Proof Light Mass Production
GS LIGHT supplied the TPE Series LED tri-proof light as the standardized lighting solution for the project. The GS-TPE1500-60W combines a 1.5m linear design with 60W power, 7,800lm output and 130lm/W efficiency.
For a project requiring more than 10,000 fixtures, the standardized configuration provided a consistent production reference from sample approval through mass production, inspection, packaging and shipment.
Parking lots, parking garages & large-area functional lighting
The GS-TPE1500-60W was selected as the primary lighting fixture for this Saudi Arabia parking lot project, with more than 10,000 units supplied. Its 1.5m linear design provides 7,800lm of luminous output from a 60W configuration, making it suitable for large-area lighting applications where consistent product specifications and high-volume supply are required.
Due to client confidentiality requirements, on-site installation images are not publicly displayed. The gallery below documents the project through production, inspection, packaging and shipment records.
* Image source: GS LIGHT factory produces LED tri proof lights.
* Image source: LED Tri Proof Light Container Loading
GS LIGHT supplied more than 10,000 GS-TPE1500-60W LED tri-proof lights for the Saudi Arabia parking lot lighting project in 2025. The standardized 1.5m fixture configuration enabled consistent product supply across the large-volume order, supported by 60W power, 7,800lm luminous output and 130lm/W efficacy.
OEM/ODM & Project Customization
Provide support in terms of specifications, structure, brand and bulk supply for large-scale projects.
16+ Years of Manufacturing Experience
Since 2009, GS LIGHT has focused on LED lighting manufacturing and project supply for international markets.
Mass Production Capability
A manufacturing network and production resources support high-volume orders from sample confirmation through mass production and shipment.
Certified Product Supply
The GS-TPE1500-60W supplied for this project is supported by CB certification, providing documented product compliance for international procurement.
Find answers to common questions about LED tri-proof lights, parking lot lighting and large-volume project supply.
Ask the supplier to quote against a fixed technical specification rather than comparing only unit prices. At minimum, compare the exact model, power, lumen output, efficacy, CCT, CRI, beam angle, input voltage, driver brand/model, IP rating, operating temperature, surge protection, lifetime, warranty and certification. Also confirm whether the quoted price includes the driver, mounting accessories, emergency function or other options. Otherwise, two fixtures with the same wattage may not be technically equivalent.
Do not approve a sample based only on appearance. Record the final production specification before mass production, including LED type, driver, power, lumen output, CCT, CRI, housing material, dimensions, wiring and optical configuration. The supplier should use the approved sample and specification as the production reference. For large orders, buyers can also request pre-shipment inspection records and batch information so that deviations can be identified before the products leave the factory.
Request the photometric file for the exact model and configuration being quoted, not a similar product from the same series. Check the luminous flux, beam distribution, CCT, mounting orientation and whether the file represents the actual production configuration. If the fixture has multiple optics, power levels or color temperatures, each configuration should have the corresponding photometric file. The file can then be used in DIALux or other lighting software to verify the proposed layout.
Use the same technical specification and request the same documents from each supplier. Compare the actual fixture configuration, component brands, photometric files, certifications, test reports, sample quality, production capacity, quality-control process, warranty and lead time. For orders involving thousands of fixtures, also ask how the supplier controls component changes during production and how defective units are handled before shipment. This creates a like-for-like comparison instead of choosing a supplier based mainly on price.
Avoid specifying only wattage and product type. A project specification should define measurable requirements such as minimum luminous efficacy, delivered lumens, CCT, CRI, beam distribution, input voltage, IP/IK protection, operating temperature, power factor, THD, surge protection, lifetime, certifications and warranty. Requiring IES/LDT files and relevant test documentation also makes technical submissions easier to compare.
For large orders, approve the sample before releasing the full production order whenever the fixture specification affects the project design or installation. The approval should cover not only appearance but also dimensions, mounting method, electrical parameters, CCT, CRI, optics, driver configuration and accessories. If any key component or specification changes after approval, the supplier should obtain approval for the revised configuration before continuing mass production.
