There is no single spacing rule: a photometric calculation sets the spacing from the road's lighting class, the number and width of lanes, the pole setback, outreach, tilt and height, the luminaire's optic and the road surface. The maintenance factor and the assessment grid of the applicable standard (ANSI/IES RP-8 or EN 13201) are part of the calculation. Send those inputs and the count and spacing follow from the result.
Depending on the series, GS LIGHT street lights support photocell switching, 0 до 10 В и затемнения DALI, and wireless control over Zigbee, Cat1 or LoRa. Wireless coverage depends on the site, the gateways and local network availability, and platform compatibility, software and any subscriptions are agreed per project. Savings from dimming depend on the operating profile the road authority permits.
Shielded optics with no uplight (U0 in the IES TM-15 BUG rating), warm color temperatures and no more output than the road needs all reduce light pollution, but together they are design inputs, not proof of compliance. The installed tilt, the local rules and the full layout decide the result. If a project calls for DarkSky Approved fixtures, confirm the listing for the exact model and configuration, because approval is granted model by model.
Fitting new LED heads on existing poles can cost less than new poles, but only after a competent structural and electrical assessment confirms the poles, arms, foundations and supply are suitable. The checks cover the arm or spigot against the head's mounting drawing, the pole's load and wind rating for the new head, the cable condition and the supply voltage; an adapter or tilt bracket does not make an unsuitable pole suitable. Surge protectors guard against surges in the supply, with ratings stated under their test conditions, and are not protection against a direct lightning strike.
Send the road or site plan, the lighting class or criteria the road authority requires, the pole positions and heights you plan to use, and the supply voltage. Add the color temperature, the control system, quantities and any certificate your market requires. Our team confirms the products, the documents and the scope of any photometric support for your project with the quotation.