GS Light logo

Street Lighting

Street lighting puts pole mounted LED luminaires with road optics along streets, site roads and parking areas, selected for the road's lighting class and confirmed in a photometric calculation.

LED street lighting fixtures built for highways, roadways, and commercial parking lots, from 30W to 300W across GS LIGHT's street light series, with warranty under GS LIGHT's written warranty terms.
street-lights

LED Street Light Fixtures for Every Roadway Application

GS LIGHT has supplied LED lighting to projects in more than 150 countries since 2009, and street lighting is one of its core outdoor lines. The street lights range runs from 30W to 300W across five series. Which LED wattage replaces an existing high pressure sodium (HPS) or metal halide lamp depends on the road's lighting class, the optics and the pole layout, so a photometric calculation decides it, not efficacy alone.

As a worked example of what a wattage drop is worth: replacing 200 heads that each draw 250W with 120W LED heads cuts the load by 26 kW (200 × 130W). At an assumed 4,000 operating hours a year, that is 104,000 kWh, about $12,480 a year at $0.12 per kWh. The example assumes 250W is the existing input (an HID lamp's ballast adds to its rated lamp power, so measure or use the datasheet) and that the LED layout meets the same maintained road lighting performance. Your figure depends on the real input, operating hours, tariff and any permitted dimming profile.

Here are the most common street lighting applications we serve:

Highways and
Roadways Lighting

Highways and roadways need light that helps drivers see lane markings, pedestrians and obstacles without creating glare or light trespass into nearby properties. The fixture wattage and pole height follow from the road's lighting class, its width and lane layout, the pole setback and outreach, and the road surface, so they are set in the calculation for each road.

In Europe, EN 13201-2:2015 sets M classes for traffic routes in road surface luminance (cd/m², from M1 at 2.0 to M6 at 0.3 average), C classes in illuminance for conflict areas such as intersections and roundabouts, and P classes for pedestrian areas; ANSI/IES RP-8 sets the criteria in North America, and the road authority decides which applies. Type I to Type V describe how a luminaire distributes light; they do not on their own meet a road class or guarantee low glare. Many cities specify 3000K or warmer to limit sky glow, while the shielding, tilt and output matter as much as the color temperature.
pexels-gryziu-30663791 (Medium) (1)

Airport Lighting

Airports require LED street lights along access roads, terminal drop off zones, and perimeter roads. These areas need consistent illumination with tight glare control. Runway, approach and airfield lighting are a different, regulated system, and any luminaire near them needs the airport authority's approval for mounting height, glare and upward light.

Voltage depends on the series: the Y, G and S Series run on AC100 to 277V, the E Series on AC100 to 305V, and the M Series on AC200 to 240V. The S Series takes an optional 10kV or 20kV surge protector for long cable runs. Aprons and large car parks usually move up to flood lights on high masts.
pexels-mik-hapte-911306098-19925645 (Medium) (1)

Industrial and
Commercial Lighting

Commercial LED street lights serve warehouses, distribution centers, manufacturing plants, and office parks. Pole height, spacing and wattage come from the calculation for each site road and car park, based on how vehicles and pedestrians move, where loading happens and the light level the site needs. Parking and site road fixtures sit within the wider outdoor area lighting range.

Site roads often need light only at night, even where the factory lighting inside runs around the clock. A photocell switches the fixtures on when the surrounding light falls and off when it rises, which removes manual switching; sites with security or camera needs may also need a timer or a control system for their own schedule.
pexels-pixabay-257636 (Medium) (1)

Parks and
Playgrounds Lighting

LED street lights illuminate trails, signs, and parking areas in parks and playgrounds. In Europe, the EN 13201-2 pedestrian classes set the target, from P1 at 15 lux down to P6 at 2 lux average, and the calculation sets the pole height and output for each path. Many parks now request shielded optics, warm color temperatures and reduced late night output to limit light pollution, which also helps nearby wildlife without guaranteeing an ecological outcome.

Footpaths inside a park often combine low poles with bollards, as on the Volgograd waterfront park, where GS LIGHT supplied 887 bollards for the walkways (bollards, not street lights). Riverside and coastal parks need more than an IP65 rating, because IP covers dust and water ingress only. Specify the coating system, the gasket material and stainless steel fasteners as well.
pexels-michael-brennan-173741263-11280563 (Medium) (1)

Resort and Hotel
Outdoor Lighting

Hotels and resorts need street lighting along driveways, parking lots, and walking paths. These fixtures serve double duty: they provide safe illumination for guests while contributing to the property's aesthetic appeal. Many hospitality projects choose 2700K to 3000K warm white, held at one color temperature along any approach a guest sees at once. The full exterior scheme, from facade and entrance to pool and garden, is covered on the hotel lighting page.

Our LED street lights mount on a pole top, a side arm or an adjustable bracket (the G Series bracket tilts ±15°). This flexibility lets designers match existing infrastructure, after the poles have been checked for the new heads.
pexels-sweetorange-14002992 (Medium) (1)

Residential Streets, Estates and Off Grid Roads

Residential streets in new developments, gated estates and farm access roads need lower output than main roads, with glare kept away from windows and gardens; the calculation sets the wattage and pole height, and roads that carry trucks or join a main route need more. Developers and homeowner associations often choose 3000K for residential streets. Plan the courtyard lighting inside an estate at the same color temperature so the street and the landscape read as one scheme.

Where trenching cable is not practical, a solar street light carries its own panel and battery. Its autonomy depends on the site's seasonal solar resource and shading, the battery's usable capacity in watt hours, the load and dimming schedule, and access for service, so ask for the sizing for the model and site. The solar lighting range covers all in one and all in two designs.
pexels-heyho-7746560-Medium-1 (Small) (1)

Choosing Street Lighting by Site

Start from the site and its users, then the lighting criteria, then the optic and the luminaire: the same street light can suit one road and fail on the next.
Site What drives the recommendation
Main and collector roads Traffic and task classification, road surface, width and lane layout, glare and maintained performance, checked with the luminaire's road optical file
Intersections and crossings Conflict points, pedestrian visibility, backgrounds, the assessment method and the authority's criteria, not road wattage alone
Industrial roads and parking How vehicles and pedestrians interact, loading operations, camera needs where specified, maintenance and actual operating schedules
Residential, hospitality and parks Neighbors' windows, ecology, glare, restrained output and color temperature, operating hours, vandalism and corrosion, pedestrian needs
Off grid access roads Seasonal solar resource, shading, battery capacity in watt hours, load and dimming schedule, autonomy and service access

Street Lighting Solutions

GS LIGHT's street light range covers 30W to 300W across five series with current product pages, from residential streets to highways. The four below cover most road projects, and the G Series (30W to 240W, adjustable ±15° bracket) fills in for mixed sites. Datasheets state a rated life of over 50,000 hours; ask for the lumen maintenance (Lxx) definition, the test conditions and the driver lifetime at your ambient temperature for the model quoted.

Certificate details are given for the model quoted, and the certifications page lists the CE (EMC and LVD) and RoHS documents on file; if your market requires UL, DLC or CB, ask for the status of the exact model. Production runs under ISO 9001 and ISO 14001, which are management system certificates rather than road lighting approvals. GS LIGHT's December 2017 project post from the United Kingdom lists its street lights supplied together with tri proof lights and UFO high bays.
light-m-series (1)

LED Street Lamp M Series

The M Series runs from 30W to 240W at up to 180 lumens per watt, with an IP66 rating and IK08 impact resistance. It fits arterial roads, collector streets, intersections and parking lots where a municipality wants a high efficacy head that is easy to service.

The driver is mounted apart from the LED module in an SKD (semi knocked down) build, so it can be specified to the project and replaced without changing the head. NFC offline programming sets the output before installation, and the head accepts a photocell or a Zigbee or Cat1 node for remote control where the project's network supports it. Input is AC200 to 240V.

LED Street Light Y Series

The Y Series covers the high output end of the range: 100W, 150W, 200W, 240W and 300W, at 140 or 170 lumens per watt with a power factor above 0.95. It suits wide highways, interchanges and large commercial parking lots where poles are tall and far apart.

Its 150° × 80° beam spreads light along the road. Choose 3000K, 4500K or 5700K and CRI 70 or 80, on AC100 to 277V input. The die cast aluminum housing is rated IP65 and operates from minus 30°C to 55°C, and it mounts on a pole top, an arm or a bracket.
street-y-series (1)
S series LED Street Lighting

LED Street Lighting S Series

The S Series runs from 40W to 300W and offers the widest optic choice in the range: Type II, III, IV and V distributions. That makes it the series to start from on mixed projects where one supplier covers narrow streets, wide roads and open parking areas.

The die cast aluminum and tempered glass head carries IK08 impact resistance and takes an optional 10kV or 20kV surge protector for long cable runs; the ingress rating and efficacy for each configuration are confirmed on its datasheet. LoRa control links heads to a gateway, and the range achieved depends on the terrain, buildings, gateway position and local frequency rules, so the network is planned with the project. Input is AC100 to 277V.

LED Street Light E Series

The E Series is built for smart city projects. It comes in 100W, 150W and 200W at 140 lumens per watt on a wide AC100 to 305V input, with 0 to 10V, DALI, Zigbee and photocell control options, Type I to Type V distributions and an IP66 housing. Which road class an installation meets depends on the layout, not on the optic alone.

GS LIGHT supplies it with an intelligent street lighting system: management software, a concentrator for each group of poles and a terminal controller in each head, for scheduled dimming, energy readings and fault reports. Network coverage, the communication link to the concentrators, software hosting and any service subscription are agreed for each project, and routine site inspections still apply.
street light manufacturers

Street Lighting FAQs

The questions buyers ask before they send a street lighting plan.

There is no single spacing rule: a photometric calculation sets the spacing from the road's lighting class, the number and width of lanes, the pole setback, outreach, tilt and height, the luminaire's optic and the road surface. The maintenance factor and the assessment grid of the applicable standard (ANSI/IES RP-8 or EN 13201) are part of the calculation. Send those inputs and the count and spacing follow from the result.

Depending on the series, GS LIGHT street lights support photocell switching, 0 to 10V and DALI dimming, and wireless control over Zigbee, Cat1 or LoRa. Wireless coverage depends on the site, the gateways and local network availability, and platform compatibility, software and any subscriptions are agreed per project. Savings from dimming depend on the operating profile the road authority permits.

Shielded optics with no uplight (U0 in the IES TM-15 BUG rating), warm color temperatures and no more output than the road needs all reduce light pollution, but together they are design inputs, not proof of compliance. The installed tilt, the local rules and the full layout decide the result. If a project calls for DarkSky Approved fixtures, confirm the listing for the exact model and configuration, because approval is granted model by model.

Fitting new LED heads on existing poles can cost less than new poles, but only after a competent structural and electrical assessment confirms the poles, arms, foundations and supply are suitable. The checks cover the arm or spigot against the head's mounting drawing, the pole's load and wind rating for the new head, the cable condition and the supply voltage; an adapter or tilt bracket does not make an unsuitable pole suitable. Surge protectors guard against surges in the supply, with ratings stated under their test conditions, and are not protection against a direct lightning strike.

Send the road or site plan, the lighting class or criteria the road authority requires, the pole positions and heights you plan to use, and the supply voltage. Add the color temperature, the control system, quantities and any certificate your market requires. Our team confirms the products, the documents and the scope of any photometric support for your project with the quotation.

Ready to Start Your Lighting Project?
From architectural lighting solutions to OEM/ODM customization, GS LIGHT helps global partners create reliable LED lighting solutions.
Copyright 2026 GS LIGHT. All Rights Reserved.
Privacy Policy
Terms & Conditions
Sitemap

Send Your Inquiry

gslight-wechat-qr